2033-S

Ferocious 2000 Series

(1 review) Write a Review
$99.47
2033-S
SKU:
108409
Condition:
New
Shipping:
Calculated at Checkout
DIA:
1/2
SHANK:
1/2
LOC:
1-1/4
OAL:
3
FLUTES:
2 Flute
END STYLE:
Square End
COATING:
ZrN
Radius:
No
Adding to cart… The item has been added

Product Overview

DIA=1/2 - SHANK=1/2 - LOC=1-1/4 - OAL=3 - FLUTES=2 Flute - END STYLE=Square End - COATING=ZrN - Radius=No-Solid Carbide End Mills | 2000 Series | 2 Flute | Square end | Ferocious | The Original 55° degree high helix end mill built for high speed milling of aluminum, non-ferrous materials and plastics. This High Performance tool yields the highest chip load and feedrates per tooth in the industry and allows you to remove more material than ever before. | 55° Degree Helix | Single End >>> Applications: Aluminum, Copper, Brass, Non-Ferrous, Plastics, Composites

Reviews

(1 review) Write a Review

1 Review Hide Reviews Show Reviews

  • 5
    CGS Comes Through Once Again

    Posted by DRINK Machine on 18th Nov 2015

    I have been patiently waiting to get my hands on the Ferocious end mills, prior to being CNC, I was advised to not use them, I previously was using a Korean made 3 flute end mill, even as a finish end mill you could feel every stepover, and had a terrible floor finish. With the 2 flute Ferocious the stepover 'ribs' were gone, and a great reflective floor finish was left. I can't review on the limits of the tool as I run it on a 3hp knee, but with .100 woc, 1" doc, 4200rpm 33ipm, in 6061 it runs great, the .004 chip load was a perfect recommendation for the power I had available. I noticed that the floor finish is better when you leave about .025" or more on the floor for finish, if you try and take say .010" it has a slightly diminished look and feel. The coating seems to work great, after a couple hours of cutting the end mill looks and feels just as it did when new.